./buildimg.sh bpi-r2 jammy
./buildimg.sh bpi-r3 bookworm
for boards not yet supported by my u-boot/kernel pipeline
or for emmc it may be needed to use own compiled packages.
the buildimg.sh reads a configfile named sourcefiles_board.conf where ‘board’
is the supplied board name (e.g. “bpi-r4”).
to use your own compiled uboot base-image (created by “build.sh createimg” in my uboot repo)
use this setting:
skipubootdownload=1
imgfile=bpi-r4_sdmmc.img.gz
for own kernel-package (created by “build.sh pack” in my kernel repo) use this:
skipkerneldownload=1
kernelfile=bpi-r4_6.5.0-rc1.tar.gz
both configs can be used together to not download anything from my github releases.
gunzip -c bpi-r3_sdmmc.img.gz | sudo dd bs=1M status=progress conv=notrunc,fsync of=/dev/sdX
user: root
password: bananapi
ssh root-login enabled (should be disabled after other users are created)
/etc/ssh/sshd_config (open e.g. with nano):
add # before PermitRootLogin=yes
and restart ssh daemon
systemctl restart ssh